On Options: My Experience Explained

Why Go for Water Jet Cutting Services

The services of water jet cutting are extensively applied in building and engineering spheres to cut many different types of materials. Water jet cutting and laser jet cutting are different in several ways. Understanding their differences is helpful for the hobbyist and professional alike when choosing the cutting method that would be perfect for their needs in particular.

Water jet cuts through materials by using a high-pressured water jet. Such high intensity of pressure needed is reached by driving the water out from a tiny hole at pressures equal to a maximum of 60,000psi. To improve the cutting work as well as the abrasion, an element identified as garnett is thrown into the water.

The resulting action of cutting is somehow the same as to when water cuts its way in the ground to form river beds throughout several thousands of years, but carried out right away and in an exact way.

With its “abrasive cutting” technique, water jet can successfully cut through various materials and many different thicknesses, when compared to laser jet cutting that can only cut through a limited selection of thicknesses or materials on which it’s effective.

It can cut through aluminum, bronze, titanium, steel and other metal alloys, and also ceramics and stone like marble and granite, composites, fiberglass, and concrete to name only a few.

Based on the type of material, the maximum thickness can be 8 inches with tolerances that can range from 0.005 inches to 0.010 inches.

Water jet is well suitable to materials that may be damaged or negatively affected by heat, because it does not apply heat when cutting. Because it doesn’t harm the material’s structural integrity, it is ideal for cutting plastic or wood, and other types of materials that laser cutter is unable to cut effectively.

The downward as well as the lateral pressure applied on the material that is being cut is nearly insignificant, thus you will not encounter further hassles nor spend additional money on fixturing.

Choosing the exact cutter for your particular building or engineering project will save money, time, as well as the trouble of replacing a sheet, if not length of construction material due to a cut that is not precise.

When you are not sure which option will work best for your particular needs, it would be wise to consult with a water jet cutting company since they are more knowledgeable and they can better establish which option is going to be well-suited for your explicit needs. If they tell you that water jet cutting will work for you, then perhaps you should heed their advice.

Why Resources Aren’t As Bad As You Think

A Quick Rundown of Machines

Post Author: admin